Jensen MS4200RS Bedienungsanleitung Seite 10
- Seite / 65
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Initial operation, Fig. 12
1. Reconnect the battery.
2. Restore complete functioning of the electrical system (clock, trip computer, alarm
system, airbag, immobilizer, etc.).
3. Switch on the ignition.
4. Insert the map CD in the radio. To register the system and activate map, travel and/or
traffic info, see the operating instructions, Section “C-IQ”, ➽ page 32.
5. Park the vehicle outdoors to ensure unimpeded GPS reception.
6. Switch on the ignition and the radio.
7. Push the NAVIGATIONbutton and confirm the user information with the OK button.
The main menu appears. The navigation radio will now initialize.
After connection of the power supply, the integrated GPS receiver requires
approximately 2 to 10 minutes until GPS reception is satisfactory.
■
Setting the mounting angle
In order to ensure perfect functioning of the system, the navigation radio must be set
to the actual installation angle in the instrument panel.
1. In navigation mode: Select the “Mounting angle” option in the “System settings”
menu.
2. Depending upon the installation, set the angle to between -10 and +30 degrees. The
system does not differentiate between negative and positive angles. Thus, even for a
mounting angle of, e.g. -10 degrees, set a value of “10" in the menu.
■
Loudspeaker test
To check the correct connection of the loudspeakers the function “Loudspeaker Test”
in the “INITIALIZATION” menu can be performed. ➽ page 30.
■
Setting the clock and the time zone
To ensure that the correct time is always displayed, select the “GPS” option in the
“INITIALIZATION” menu under “ClockSettings” and set the time zone for your
location. ➽ page 30.
Checking the vehicle functions
A
Check the safety-relevant vehicle functions only when the car is stationary, or moving
at low speed. Only perform the check in an open area.
Brake system, alarm system, lights, immobilizer, speedometer, trip computer, clock.
■
Checking GPS reception
Enter a destination and select “Guidance”. Call up the “GPS / Compass” information
menu via the guidance screen (see operating instructions) and check the number of
satellites. For a sufficiently exact location determination the number should be
between 4 and 8.
■
Calibrating the system
For automatic calibration, perform a short test drive (approx. 10 minutes) on digitized
roads. Change direction several times.
k
INSTALLATION INSTRUCTIONS
7
- MS4200RS 1
- TABLE OF CONTENTS 2
- Attention! 3
- SAFETY AND WARNINGS 4
- IMPORTANT INFORMATION 6
- INSTALLATION INSTRUCTIONS 7
- Mounting the radio, Fig. 11 9
- Initial operation, Fig. 12 10
- Technical Support 11
- GENERAL INFORMATION 12
- The digital road map 13
- Removable operating panel 14
- Security code 14
- Anti-theft protection LED 14
- Notes on audio CDs 15
- Notes on map CDs 15
- Handling CDs 15
- RDS (Radio Data System) 15
- Control elements 16
- Displays 17
- OPERATION 18
- Menu title 19
- Entering letters 20
- Normal and expert modes 21
- INFORMATION 22
- Ann. level: 2 22
- TMC Scan 22
- “INFORMATION” MENU 23
- SOUND SETTINGS 24
- Setting stations 26
- RDS Memo 27
- Autostore 27
- Store Preset 27
- Recall Program 27
- Extra info 28
- PTY search (only on FM) 28
- Radio Setup 28
- Initialization 28
- CD PLAYER Rnd 29
- Repeat Track 30
- CD Title 30
- Extra Info 30
- CD changer (accessories) 31
- CD CHANGER 32
- Select CD 32
- INITIALISATION 33
- Beep Level: 1 33
- Scan Time: 15s 33
- On Off Logic 33
- Clock Settings 33
- Initial IDZ ? 35
- Navi ID: 8Q6S 7ED4 35
- CD EUR 2003/01 NT 35
- SW ID: 0046 35
- Code Input 36
- OK Quit ? 36
- 8QR5-Z4AK 36
- G __-____6 36
- C-IQ Settings 37
- C-IQ Info 37
- C-IQ Service 37
- Main menu 38
- Destination input 38
- Via point input 38
- Guidance 38
- Traffic info 38
- New address 39
- Last destin 39
- Info on car pos 39
- Load address 39
- Entering a new address 40
- NAVIGATION 41
- Long-/Latitude 43
- 115°09'43" West 43
- 36°14'21" North 43
- Audible messages 47
- AVORY DRV 48
- Route selection 49
- Route list 50
- Via points 51
- 04/02/03 8:12 am 51
- Alternative route 52
- Address manager 53
- Store address 53
- Delete address 53
- Delete via points 53
- Store current loc 53
- Emergency 55
- GPS position 55
- Car position 55
- System settings 56
- Guidance screen 56
- Dyn. route sett 56
- Language 56
- Measuring units 57
- Default settings 58
- Mounting angle 58
- System Info 58
- Troubleshooting 60
- TROUBLESHOOTING 61
- 12-Month Limited Warranty 62
- CEA Power Ratings 63
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.747 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern