Jensen MS4200RS Bedienungsanleitung PDF herunterladen (Seite 8)

Connection overview ISO connector B (loudspeakers), Fig. 3:

Pin Wire color Connection to loudspeaker

B1 Blue + Rear right (RR+)

B2 Blue/black – Rear right (RR–)

B3 Grey + Front right (FR+)

B4 Grey/black – Front right (FR–)

B5 Green + Front left (FL+)

B6 Green/black – Front left (FL–)

B7 White + Rear left (RL+)

B8 White/black – Rear left (RL–)

Use only 4-ohm impedance speakers.

Do not connect either speaker wire to chassis ground.

A Use caution when connecting an aftermarket amplifier to the speaker outputs.

Do not connect speakers via an external fader.

Connection overview ISO connector C, Fig. 4 - 6

■

Yellow connector C1 (Preamp line-out):

An amplifier with additional loudspeakers can be connected to the unit via this connector.

–

Connect the “FRONT” lead to the front left (white) and front right (red) channel of

the amplifier.

–

Connect the “REAR” lead to the rear left (white) and rear right (red) channel of the

amplifier.

–

Connect the blue/yellow lead to the remote control (REMOTE) of the amplifier.

■

Green connector C2

Telephone input (adapter cable accessories):

Connect the loudspeaker output of the mobile phone or hands-free unit to the yellow

connector at the end of cable C2. For information about setting the telephone attributes,

refer to “INITIALIZATION” ➽ Page 30.

■

Blue connector C3 (CD changer):

You can connect an optional CD changer to the unit. For further information call technical

support.

INSTALLATION INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 64 65

Keine Kommentare

Jensen MS4200RS Bedienungsanleitung Seite 8